PACS DetectorSelectionTables for ILT

* 10003: Photometer Selection. Bad Column deselected

* 10002: Spectrometer Selection. Red and Blue with right FOV column deselected

* 10001: Spectrometer Selection Test. Arbitrary, fully asymetric pattern

* 10000: All Pixels valid: This is used to reset the SPU!

* 9999: Bolometer Selection Test. Arbitrary, fully asymetric pattern

* 9998: Bolometer Selection Test. Arbitrary, fully asymetric pattern

* 9997: Bolometer Selection Test. Arbitrary, fully asymetric pattern

* 7602: Spec: 14 random pixels/ Bolo: 14 random pixels

* 7601: Spe: Resistor pixels/ Bolo: 16 random pixels

* Procedure to generate a PacsDetectorSelectionTable

* The guideline is not to use CQM or other DetectorSelectionTables from the past.

* Have a look whether you may use an existing DetectorSelectionTable :

* In case you have to define your own DetectorSelectionTable you need to get a number for it

* Make your DetectorSelectionTable with :

* From within the Editor you give the ID Number (step 3) and save the <IdNumber>.dxset and <IdNumber>.tcl scripts

* If you do not have CVS send the files <IdNumber>.dxset and <IdNumber>.tcl to :

* Diego will :

* Ekki and Michael will :

Herschel: PACS/FM_ILT_Procedures/DetectorSelectionTables (last edited 2009-07-15 14:32:37 by localhost)