Describe PACS/FM ILT Procedures/CCMprocedures here.
Standard Procedures
A new MIB (combination) is available and ready to be used
The MIB to be ingested can be specified in two different ways, either by the CVS MibTags or by the database MibLabels.
ccm -loadmib PACS_MIB_TAG EGSE_MIB_TAG CDMSSIM_MIB_TAG
or
ccm -loadmib=MIB_LABEL
The MIB loading does not affect any ongoing operation. It can be executed at any time.
A new (modifiable) instrumentModel shall be created using new MIB definition
The MIB must be already ingested into the database using the above procedure.
Depending from the source for the initial CUS definitions two command options are available.
Using an existing version from the CUS CVS repository specified by a CVS tag name which is formed like a MissionConfigurationLabel.
ccm -createmodel -usemib=MIB_LABEL -usecus=cvs=CvsTagName CVScomment
Using the current CUS definitions from an existing (modifiable) instrumentModel in the database specified by an InstrumentModelLabel name.
ccm -createmodel -usemib=MIB_LABEL -usecus=im=InstrumentModelLabel CVScomment
Each of these options will create an instrumentModel, load it with the specified MIB, load the requested CUS definitions (also updating the CVS repository) and create the first missionConfiguration for this new instrumentModel. Finally the property file will be updated with the new instrumentModel and missionConfiguration and the test-control server will be restarted.
Note: The CUS editor "cusgui" must be restarted to view (and edit) the new modifiable instrumentModel.
Publish CUS modifications for the current instrumentModel
Whenever you want to make the CUS modification edited with the CUS editor available for commanding you must commit your changes to the database to update the instrumentModel and you must use the following command to create a new missionConfiguration and make it available.
ccm -updatecus CVScomment
Recovery Procedures
Reloading a MIB for an already existing instrumentModel