WaveCalNoChop
// Purpose : Wavelength calibration and instrumental profile // CUS author : HF // Description : Uses OBCP28 for executing a parameterized scan of any length, // stepsize etc. Represents a generic non-chopped grating scan /// Dependencies : SPEC_heater, SPEC_cre_setup /// Preconditions : PACS must be on and configured for spectroscopy // Comments : Can be run for wavelength calibration, instrumental profile and // ghost search // Version : 0.3 // History // 0.1 21-sep-2007 DAC adapted from IST's Wave_Cal (converted from "mode" to // "procedure") // 0.2 14-jan-2008 DAC Added bias_r... input variables; read CS positions as // for AOTs, viz. from CHOPPERCSparams; removed "duree" code // 0.3 15-jan-2008 Renamed to WaveCalNoChop (in preparation for WaveCalChop) //
Input variable(s):
procedure WaveCalNoChop {
string fltPOS = "POS A"; // Filter wheel position (0="POS A", 1="POS B")
int grat_start = 500000; // grating start position for scan\
int grat_stepsize = 200; // grating step size
int grat_numsteps = 50; // number of grating steps in one direction
int grat_numramps = 3; // number of ramps per grating position
int chop_def = 648; // chopper position during grating scan
int nb_rdout_ramp = 64; // number of readouts per ramp
int num_updown = 1; // number of grating updown scans
int grat_def = 496000; // position of grating after the scan
int capa_red = 12; // Red capacitor
int capa_blu = 12; // Blue capacitor
double bias_r_blu = 0.01; // Bias "r" blue
double bias_r_red = 0.01; // Bias "r" red
double bias_d_blu = 0.198; // Bias "d" blue
double bias_d_red = 0.069; // Bias "d" red
int nb_samp_subramp_blu = 64; // Nb of blue samples per sub-ramp
int nb_samp_subramp_red = 64; // Nb of red samples per sub-ramp
}{The following scripts are needed to schedule this module: