PHOT_seq_setup

// Purpose       : Loading the sequencer to build up the signal (OBMO)
//                 for normal DDCS mode
// CUS author    : DAC
// Script file   : PHOT_seq_setup.txt
//
// Description  : This script will set the sequencer, which is building
//                up the final signal and it sets the data mode
//                to "Bolo & HK".
//                This script should be executed just after the
//                switch-on procedure, the BOLC initialisation
//                and the bias SETTING (polarizer)
//                The purpose of this scenario is to configure the BOLC
//                sequencer.
//                The sequencer will provide clock signals for detector
//                readout and for BOLC analog synchronous operation
//                (switching between S and Sref, triggering A to D conversion)
//
// Version       : 0.2
// History       : 0.1 13-apr-2005 DAC. Based on TM's V1.0 from 20-apr-2004
//               : 0.2 13-apr-2006 TM, updated for new sequencer, cleaning
//                                 of commands in the end (2_Load_of_new_sequencer.txt)

Input variables (none):

int[] procedure PHOT_seq_setup {
}{