Diff for "FmIltProc/SpectroSetup"

Differences between revisions 30 and 31

=Spectroscopy Setup=

Dynamic range per capacitance

Procedures : FmIltProc/DynamicRangeSpectro
Pre-test setup:
- Note, that the related PTD contains a combined measurement of 1.2.3, 1.2.8 and 1.2.18 blocks, and cannot be applied in its original form.
- Set the OGSE BB temperatures (SET_UP_OGSE_BB_TEMP_OBS, see the temperatures below)
- Move filter wheel to "POS A" (SPEC_fltw_move)
CUS scripts: SPEC_dyn_range_obs, SPEC_DiagHK_DynRange_block_stop, SPEC_DiagHK_DynRange_block_start
Each measurement block (OGSE BB temperature setup) runs through all combinations of integration capacitor (0.1pF, 0.3pF, 1pF, 3pF) and reset interval values (1/8s, 1/4s, 1/2s, 2s), and is performed for two grating positions (GR-1 = 760000 and GR-2 = 490000).
- Setup #1: OBSE BB1: 16.3K, OGSE BB2: 15.7K
- Setup #2: OBSE BB1: 18.8K, OGSE BB2: 18.2K
- Setup #3: OBSE BB1: 25.4K, OGSE BB2: 24.6K
- Setup #4: OBSE BB1: 32.5K, OGSE BB2: 31.5K
- Setup #5: OBSE BB1: 40.7K, OGSE BB2: 39.3K
- Setup #6: OBSE BB1: 48.0K, OGSE BB2: 46.0K
- Setup #7: OBSE BB1: 61.4K, OGSE BB2: 58.6K
- Setup #8: OBSE BB1: 77.0K, OGSE BB2: 73.0K
Estimated duration of the tests for each indivitual OGSE BB setting: 2x4x4x128s + 2x15s for grating movement + 1080s OGSE BB stabilization = 1.45h

-  ⇤ ← Revision 30 as of 2007-02-28 09:56:53 → 
  Size: 5268
  Editor: KissCsaba
  Comment:
+   ← Revision 31 as of 2007-03-01 15:34:38 → ⇥
  Size: 1343
  Editor: KissCsaba
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 8:
+   * Note, that the related PTD contains a combined measurement of 1.2.3, 1.2.8 and 1.2.18 blocks, and cannot be applied in its original form.
-Line 11:
+Line 12:
- * Below are all combinations of the OGBE BB temperature, integration capacitor and reset interval values. Note, that the parameter of the SPEC_dynamic_range_fmilt123_OBS CUS script is the ramp length, and not the reset interval! (1/16s -> 16; 1/4s -> 64; 1/2s -> 128; 2s -> 512). The integration capacitor/reset interval block is performed for two grating positions: GR-1 = 760000 and GR-2 = 490000.
+ * Each measurement block (OGSE BB temperature setup) runs through all combinations of integration capacitor (0.1pF, 0.3pF, 1pF, 3pF) and reset interval values (1/8s, 1/4s, 1/2s, 2s), and is performed for two grating positions (GR-1 = 760000 and GR-2 = 490000).
-Line 15:
+Line 16:
-    || GR-1  || 0.1pF || 0.3pF  || 1pF || 3pF ||
    || 1/16s ||     ||      ||      ||     ||
    || 1/4s  ||     ||      ||      ||     ||
    || 1/2s  ||     ||      ||      ||     ||
    || 2s    ||     ||      ||      ||     ||
 
    || GR-2  || 0.1pF || 0.3pF  || 1pF || 3pF ||
    || 1/16s ||     ||      ||      ||     ||
    || 1/4s  ||     ||      ||      ||     ||
    || 1/2s  ||     ||      ||      ||     ||
    || 2s    ||     ||      ||      ||     ||
-Line 28:
+Line 17:
-    || GR-1  || 0.1pF || 0.3pF  || 1pF || 3pF ||
    || 1/16s ||     ||      ||      ||     ||
    || 1/4s  ||     ||      ||      ||     ||
    || 1/2s  ||     ||      ||      ||     ||
    || 2s    ||     ||      ||      ||     ||

    || GR-2  || 0.1pF || 0.3pF  || 1pF || 3pF ||
    || 1/16s ||     ||      ||      ||     ||
    || 1/4s  ||     ||      ||      ||     ||
    || 1/2s  ||     ||      ||      ||     ||
    || 2s    ||     ||      ||      ||     ||
-Line 44:
+Line 20:
-    || GR-1  || 0.1pF || 0.3pF  || 1pF || 3pF ||
    || 1/16s ||     ||      ||      ||     ||
    || 1/4s  ||     ||      ||      ||     ||
    || 1/2s  ||     ||      ||      ||     ||
    || 2s    ||     ||      ||      ||     ||

    || GR-2  || 0.1pF || 0.3pF  || 1pF || 3pF ||
    || 1/16s ||     ||      ||      ||     ||
    || 1/4s  ||     ||      ||      ||     ||
    || 1/2s  ||     ||      ||      ||     ||
    || 2s    ||     ||      ||      ||     ||
-Line 58:
+Line 21:
-    || GR-1  || 0.1pF || 0.3pF  || 1pF || 3pF ||
    || 1/16s ||     ||      ||      ||     ||
    || 1/4s  ||     ||      ||      ||     ||
    || 1/2s  ||     ||      ||      ||     ||
    || 2s    ||     ||      ||      ||     ||

    || GR-2  || 0.1pF || 0.3pF  || 1pF || 3pF ||
    || 1/16s ||     ||      ||      ||     ||
    || 1/4s  ||     ||      ||      ||     ||
    || 1/2s  ||     ||      ||      ||     ||
    || 2s    ||     ||      ||      ||     ||
-Line 74:
+Line 24:
-    || GR-1  || 0.1pF || 0.3pF  || 1pF || 3pF ||
    || 1/16s ||     ||      ||      ||     ||
    || 1/4s  ||     ||      ||      ||     ||
    || 1/2s  ||     ||      ||      ||     ||
    || 2s    ||     ||      ||      ||     ||

    || GR-2  || 0.1pF || 0.3pF  || 1pF || 3pF ||
    || 1/16s ||     ||      ||      ||     ||
    || 1/4s  ||     ||      ||      ||     ||
    || 1/2s  ||     ||      ||      ||     ||
    || 2s    ||     ||      ||      ||     ||
-Line 88:
+Line 25:
-    || GR-1  || 0.1pF || 0.3pF  || 1pF || 3pF ||
    || 1/16s ||     ||      ||      ||     ||
    || 1/4s  ||     ||      ||      ||     ||
    || 1/2s  ||     ||      ||      ||     ||
    || 2s    ||     ||      ||      ||     ||

    || GR-2  || 0.1pF || 0.3pF  || 1pF || 3pF ||
    || 1/16s ||     ||      ||      ||     ||
    || 1/4s  ||     ||      ||      ||     ||
    || 1/2s  ||     ||      ||      ||     ||
    || 2s    ||     ||      ||      ||     ||
-Line 105:
+Line 28:
-    || GR-1  || 0.1pF || 0.3pF  || 1pF || 3pF ||
    || 1/16s ||     ||      ||      ||     ||
    || 1/4s  ||     ||      ||      ||     ||
    || 1/2s  ||     ||      ||      ||     ||
    || 2s    ||     ||      ||      ||     ||

    || GR-2  || 0.1pF || 0.3pF  || 1pF || 3pF ||
    || 1/16s ||     ||      ||      ||     ||
    || 1/4s  ||     ||      ||      ||     ||
    || 1/2s  ||     ||      ||      ||     ||
    || 2s    ||     ||      ||      ||     ||
-Line 120:
+Line 29:
-    || GR-1  || 0.1pF || 0.3pF  || 1pF || 3pF ||
    || 1/16s ||     ||      ||      ||     ||
    || 1/4s  ||     ||      ||      ||     ||
    || 1/2s  ||     ||      ||      ||     ||
    || 2s    ||     ||      ||      ||     ||

    || GR-2  || 0.1pF || 0.3pF  || 1pF || 3pF ||
    || 1/16s ||     ||      ||      ||     ||
    || 1/4s  ||     ||      ||      ||     ||
    || 1/2s  ||     ||      ||      ||     ||
    || 2s    ||     ||      ||      ||     ||
-Line 135:
+Line 31:
- * Measurements / Preliminary analysis : FmIltAnal/DynamicRangeSpectro

Herschel: Diff for "FmIltProc/SpectroSetup"

Dynamic range per capacitance