Differences between revisions 3 and 4
⇤ ← Revision 3 as of 2014-04-04 08:26:49 →
Size: 785
Editor: VadimBurwitz
Comment:
← Revision 4 as of 2014-04-04 08:27:21 → ⇥
Size: 795
Editor: VadimBurwitz
Comment:
Deletions are marked like this. Additions are marked like this.
Line 4: Line 4:
 * Check if focuser and mount are powered see ePowerSwitch #1.
[[ePower01AllOnCCDoffMarked.JPG]]		  * Check if focuser and mount are powered see ePowerSwitch #1. [[attachment:ePower01AllOnCCDoffMarked.JPG]]

How to start up observatory

  • Check weather (outside conditions)

  • Check if focuser and mount are powered see ePowerSwitch #1. ePower01AllOnCCDoffMarked.JPG

    • and if they are reall running
    is running. If not switch it on Port 2
  • Power up mount (switch on power supply, then toggle mount switch both on ePowerSwitch #1)
    • if not yet powered up (usually it should be powered up).
  • power imager(s) if not already powered up (ethernet PDU)
  • open dome

How to start up GOWI

  • cool imager to target temperature (-30C typically)
  • start dark and bias frame sequence
  • set focuser to expected setting for the night (if known)

  • take skyflats until start of actual observations

cogwiki: HowTo/Startup (last edited 2022-10-08 17:04:36 by VadimBurwitz)