Differences between revisions 2 and 9 (spanning 7 versions)

How to start up observatory

and connected to mount and focuser respectively.

This should usally be the case.

If they are not started, start up windows internet explorer.
Log on to ePower #1
Check if focuser and mount are powered on ePower #1.
Power up the focuser is necessary
Power up mount if necessery: (switch on power supply, then toggle mount switch both on ePowerSwitch #1)
- if not yet powered up (usually it should be powered up).
power imager(s) if not already powered up (ethernet PDU)
open dome

How to start up GOWI

-  ⇤ ← Revision 2 as of 2014-04-04 08:23:04 → 
  Size: 750
  Editor: VadimBurwitz
  Comment:
+   ← Revision 9 as of 2014-04-04 10:02:29 → ⇥
  Size: 1184
  Editor: VadimBurwitz
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 4:
- * Check if focuser and mount are powered see ePowerSwitch #1.
-Line 6:
+Line 5:
-   and if they are reall running
   
 is running. If not switch it on Port 2
 * Power up mount (switch on power supply, then toggle mount switch both on ePowerSwitch #1)
+ * Log on to control PC via VNC '''skydome.mpe.mpg.de''' port '''5200'''  
 
 * 1st check if '''mount handpad''' program and '''focuser''' program are running
and connected to mount and focuser respectively. 

This should usally be the case.

 * If they are not started, start up windows internet explorer. 
   {{attachment:PC2_expl_weather_ePower01Marked.JPG}}

 * Log on to '''ePower #1'''

 * Check if focuser and mount are powered on '''ePower #1'''. 
   {{attachment:ePower01AllOnCCDoffMarked.JPG}}

 * Power up the focuser is necessary 

 * Power up mount if necessery:  (switch on power supply, then toggle mount switch both on ePowerSwitch #1)