Differences between revisions 1 and 7 (spanning 6 versions)

How to start up observatory

Check weather (outside conditions)
Log on to control PC via VNC skydome.mpe.mpg.de port 5200
If not started, start up windows explorer.
Log on to ePowerSwitch 1
Check if focuser and mount are powered see ePowerSwitch #1.
- and if they are reall running
is running. If not switch it on Port 2
Power up mount (switch on power supply, then toggle mount switch both on ePowerSwitch #1)
- if not yet powered up (usually it should be powered up).
power imager(s) if not already powered up (ethernet PDU)
open dome

How to start up GOWI

-  ⇤ ← Revision 1 as of 2013-11-30 15:15:18 → 
  Size: 461
  Editor: TassiloSchweyer
  Comment:
+   ← Revision 7 as of 2014-04-04 09:36:29 → ⇥
  Size: 1019
  Editor: VadimBurwitz
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 4:
- * Power up mount and imager(s) if not already powered up (ethernet PDU)
+ * Log on to control PC via VNC '''skydome.mpe.mpg.de''' port '''5200'''  
 
 * If not started, start up windows explorer. 
   {{attachment:PC2_expl_weather_ePower01Marked.JPG}}

 * Log on to ePowerSwitch 1

 * Check if focuser and mount are powered see ePowerSwitch #1. 
   {{attachment:ePower01AllOnCCDoffMarked.JPG}}

   and if they are reall running
   
 is running. If not switch it on Port 2
 * Power up mount (switch on power supply, then toggle mount switch both on ePowerSwitch #1) 
   if not yet powered up (usually it should be powered up).
 * power imager(s) if not already powered up (ethernet PDU)