|
⇤ ← Revision 1 as of 2013-11-30 15:15:18
Size: 461
Comment:
|
Size: 750
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 4: | Line 4: |
| * Power up mount and imager(s) if not already powered up (ethernet PDU) | * Check if focuser and mount are powered see ePowerSwitch #1. and if they are reall running is running. If not switch it on Port 2 * Power up mount (switch on power supply, then toggle mount switch both on ePowerSwitch #1) if not yet powered up (usually it should be powered up). * power imager(s) if not already powered up (ethernet PDU) |
How to start up observatory
Check weather (outside conditions)
- Check if focuser and mount are powered see ePowerSwitch #1.
- and if they are reall running
- Power up mount (switch on power supply, then toggle mount switch both on ePowerSwitch #1)
- if not yet powered up (usually it should be powered up).
- power imager(s) if not already powered up (ethernet PDU)
- open dome
How to start up GOWI
- cool imager to target temperature (-30C typically)
- start dark and bias frame sequence
- set focuser to expected setting for the night (if known)
take skyflats until start of actual observations