Differences between revisions 1 and 10 (spanning 9 versions)

How to start up observatory

Check weather (outside conditions)
Log on to control PC via VNC skydome.mpe.mpg.de port 5200
1st check if mount handpad program and focuser program are running and connected to mount and focuser respectively. This should usally be the case.
If they are not started, start up windows internet explorer.
Log on to ePower #1
Check if focuser and mount are powered on ePower #1.
Power up the focuser is necessary
Power up mount if necessery: (switch on power supply, then toggle mount switch both on ePowerSwitch #1)
- if not yet powered up (usually it should be powered up).
power imager(s) if not already powered up (ethernet PDU)
open dome

How to start up GOWI

-  ⇤ ← Revision 1 as of 2013-11-30 15:15:18 → 
  Size: 461
  Editor: TassiloSchweyer
  Comment:
+   ← Revision 10 as of 2014-04-04 10:02:43 → ⇥
  Size: 1187
  Editor: VadimBurwitz
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 4:
- * Power up mount and imager(s) if not already powered up (ethernet PDU)
+ * Log on to control PC via VNC '''skydome.mpe.mpg.de''' port '''5200'''  
 
 * 1st check if '''mount handpad''' program and '''focuser''' program are running
 and connected to mount and focuser respectively. 
 
 This should usally be the case.

 * If they are not started, start up windows internet explorer. 
   {{attachment:PC2_expl_weather_ePower01Marked.JPG}}

 * Log on to '''ePower #1'''

 * Check if focuser and mount are powered on '''ePower #1'''. 
   {{attachment:ePower01AllOnCCDoffMarked.JPG}}

 * Power up the focuser is necessary 

 * Power up mount if necessery:  (switch on power supply, then toggle mount switch both on ePowerSwitch #1) 
   if not yet powered up (usually it should be powered up).
 * power imager(s) if not already powered up (ethernet PDU)