Differences between revisions 11 and 12
⇤ ← Revision 11 as of 2008-02-12 15:24:10 →
Size: 2448
Editor: dcesarsky
Comment:
← Revision 12 as of 2008-02-13 12:14:29 → ⇥
Size: 1047
Editor: dcesarsky
Comment:
Deletions are marked like this. Additions are marked like this.
Line 3: Line 3:
'''P''''''acsEng_Chopper_A''''''utoOpt''' is the expert HSPOT rendition of the IST module called '''PACS_Chopper_uk_move_12000_OBS'''

Information extracted from the CUS script

{{{
// Missionphase : Commissioning
//
// Purpose : Check a series of different chopper controller settings by
// chopping between +/- 12000 units (~4 deg)
//
// Author : Markus Nielbock/Helmut Dannerbauer
// CUS author : MN/HD
//
// Description : The instrumental command for move chopper to absolute position
// is called. Go to chopper position +-12000 with plateau time
// of 2 sec and chop cycles of 10.
//
// Dependencies :
//
// Preconditions: PACS switched on and Chopper switched off.
//
// Comments : This script is based on the commanding script
// PACS_Chopper_uk_move_12000_OBS.cus
//
// Version : 2.0
//
// History : 1.0 20-Nov-2007 (MN) Script to do simple chopper cycle
// 2.0 23-jan-2008 DAC Removed _OBS from name as PacsEng
// already implies an OBS
//
//
// Initialise input parameters:
// Defines control parameter range, loops run from k(p,i,c,f)min to
// k(p,i,c,f)max defining the inverse of the ratio of parameter change w.r.t.
// the default value.
}}}
Input variables:
{{{
obs PacsEng_Chopper_AutoOpt {
    int kpmin = 0 in [-3,3];
    int kpmax = 0 in [-3,3];
    int kimin = 0 in [-3,3];
    int kimax = 0 in [-3,3];
    int kcmin = 0 in [-3,3];
    int kcmax = 0 in [-3,3];
    int kfmin = 0 in [-3,3];
    int kfmax = 0 in [-3,3];
}{
}}}		 '''P''''''acsEng_Chopper_A''''''utoOpt''' is the expert HSPOT rendition of the IST module called '''PACS_Chopper_uk_move_12000_OBS'''. The main module for this Eng observation is PACS_Chopper_AutoOpt; see there for mor details.

PacsEng_Chopper_AutoOpt

PacsEng_Chopper_AutoOpt is the expert HSPOT rendition of the IST module called PACS_Chopper_uk_move_12000_OBS. The main module for this Eng observation is PACS_Chopper_AutoOpt; see there for mor details.

PacsEng_Chopper_AutoOpt calls the following modules (listed in alphabetical order):

[wiki:PACS/CUSPVscripts/EnDisChopper EnDis_chopper]

[wiki:PACS/CUSPVscripts/PACSChopperAutoOpt PACS_Chopper_AutoOpt]

[wiki:PACS/CUSPVscripts/PACSChopperMovAbsFmBb PACS_Chopper_mov_abs_fm_bb]

[wiki:PACS/CUSPVscripts/PACSChopperSWONSWOFonly PACS_Chopper_SWON_SWOF_only]

[wiki:PACS/CUSPVscripts/PACS_stop_dhk_fm_bb PACS_stop_dhk_fm_bb]

[wiki:PACS/CUSPVscripts/SPEC_Chopper_dhk_5hk_1khz_bb SPEC_Chopper_dhk_5hk_1khz_bb]

[wiki:PACS/CUSPVscripts/WriteBBID WriteBBID]

[wiki:PACS/CUSPVscripts/WriteEndBB WriteEndBB]

[wiki:PACS/CUSPVscripts/WriteEndID WriteEndID]

[wiki:PACS/CUSPVscripts/WriteOBSID WriteOBSID]

Herschel: PACS/CUSPVscripts/PacsEng_Chopper_AutoOpt (last edited 2009-07-15 14:32:38 by localhost)