PACS/CUSPVscripts/PacsEng_Background_Adjustment

The module PacsEng_Background_Adjustment is the expertHSPOT equivalent of IST's module Background_Adjustment_OBS; see General Setup for Photometer Operation in the Wiki page PhotOperations for more detailed information.

PacsEng_Background_Adjustment calls the following modules:

WriteEndID	Procedure
Pacs_DPU_START_OBCP	Command
Pacs_DMC_SET_BBID	Command
Pacs_DMC_SET_TIME	Command
Pacs_DMC_SWON_FW_SPEC	Command
DMC_spec_2_3_chop	Procedure
Pacs_SPUS_RAW_CHAN_TRAN_MODE	Command
SPEC_spu_setup	Procedure
Pacs_SPUL_WRT_DET_CST_SPEC	Command
WriteBBID	Procedure
Pacs_DMC_SWON_GRAT_CONT	Command
OBCP_spec_2_3_chop	Building Block
Pacs_DMC_MOVE_SPEC_FW_LOC	Command
Msec2sec	Procedure
Pacs_SPUL_STOP_REDUCT_COMPR	Command
SPEC_heater	Procedure
Pacs_DMC_WRT_B_SPEC_PAR	Command
Pacs_DMC_WRT_R_SPEC_PAR	Command
Pacs_DMC_ENABLE_GRAT_CONT	Command
SPEC_fltw_move	Procedure
Pacs_SPUL_START_REDUCT_COMPR	Command
SPEC_spu_reset	Procedure
Pacs_Background_Adjustment	Procedure
Pacs_DMC_SET_B_SPEC_HEAT_C	Command
Pacs_SPUS_STOP_REDUCT_COMPR	Command
Pacs_SPUS_WRT_DET_CST_SPEC	Command
WriteOBSID	Procedure
Pacs_SPUS_START_REDUCT_COMPR	Command
SPEC_cre_setup	Procedure
Pacs_DMC_DISABLE_GRAT_CONT	Command
Pacs_SPUL_RAW_CHAN_TRAN_MODE	Command
Pacs_DMC_SET_OBSID	Command
Pacs_DMC_SET_PAR_BOTH_SPEC	Command
Pacs_DPU_SEND_TIME	Command
Pacs_DMC_WRT_SPU_TRAN_MODE	Command
Array2grp_1	Procedure

Herschel: PACS/CUSPVscripts/PacsEng_Background_Adjustment (last edited 2009-07-15 14:32:36 by localhost)