110
Comment:
|
1179
|
Deletions are marked like this. | Additions are marked like this. |
Line 3: | Line 3: |
Expert HSPOT rendering of the IST mode '''P''''''ACS_GeGa_SFT_Init_Warm'''. | Expert HSPOT rendering of the IST mode '''P''''''ACS_G''''''eGa_SFT_Init_Warm'''. There are no input parameters to invoke this OBS script. The module '''P''''''ACS_G''''''eGa_SFT_Init_Warm''' is described as: {{{ // Missionphase : PACS EQM Test // // Purpose : Warm SFT of Ge:Ga detector chain // // Author : H. Feuchtgruber // // Arguments : none // // // Description : This script will switch on and set all required parameters // for a test of the Ge:Ga detector chain at RT temperature. // Dummy resistor bias = 10 mV, detector bias = 2 mV // // // Comments : // // Version : 1.0 // History : 1.0 / 16-Nov-2004 initial version // 1.1 7-mar-2006 TeleCommand Pacs_DMC_SET_B_SPEC_HEAT_1_C renamed // TeleCommand Pacs_DMC_SET_B_SPEC_HEAT_2_C renamed // 1.2 24-mar-2006 Large overhaul based on // SetupSpectroscopyWEplusFPUsim.tcl script // 1.3 27-nov-2006 Changed bias_d to LB value: 1mV // 2.0 8-feb-2007 Added switchoff SPECs and DECs // }}} Calling syntax: {{{ procedure PACS_GeGa_SFT_Init_Warm { }{ }}} |
PacsEngGeGa_SFT_Init_Warm
Expert HSPOT rendering of the IST mode PACS_GeGa_SFT_Init_Warm. There are no input parameters to invoke this OBS script. The module PACS_GeGa_SFT_Init_Warm is described as:
// Missionphase : PACS EQM Test // // Purpose : Warm SFT of Ge:Ga detector chain // // Author : H. Feuchtgruber // // Arguments : none // // // Description : This script will switch on and set all required parameters // for a test of the Ge:Ga detector chain at RT temperature. // Dummy resistor bias = 10 mV, detector bias = 2 mV // // // Comments : // // Version : 1.0 // History : 1.0 / 16-Nov-2004 initial version // 1.1 7-mar-2006 TeleCommand Pacs_DMC_SET_B_SPEC_HEAT_1_C renamed // TeleCommand Pacs_DMC_SET_B_SPEC_HEAT_2_C renamed // 1.2 24-mar-2006 Large overhaul based on // SetupSpectroscopyWEplusFPUsim.tcl script // 1.3 27-nov-2006 Changed bias_d to LB value: 1mV // 2.0 8-feb-2007 Added switchoff SPECs and DECs //
Calling syntax:
procedure PACS_GeGa_SFT_Init_Warm { }{