PACS Chopper_SFT_Warm_OpenLoop
// Purpose : SFT in Open Loop Mode (warm conditions) // Author : Markus Nielbock // Description : SFT warm for FM1 chopper in open-loop mode. All 3 coils are // operative. The chopper is commanded between -20 mA and +20mA // in steps of 4 mA. // The first part consists of chopper deflections equivalent to // commanded chopper coil currents between 0 and +/-20 mA, // alternating between positive and negative values. Absolute // position commanding is used. // The second part consists of a ramp of chopper deflections // between -20 and +20 mA, commanded in relative steps of 4 mA. // Finally, the chopper returns to its zero position. // Preconditions : PACS switched-on in spectroscopy mode, chopper is switched // off and disabled, diagnostic HK not running // Comments : Adapted from PACS_Chopper_SFT_Cold_OpenLoop_OBS.cus // Version : 1.0 // History : 1.0 12-03-07 creation by MN // : 2.0 13-02-08 Made into a proc to be called by // "obs" PacsEng_Chpper_SFT_Warm_OpenLoop // Removed declaration of myOBSID
Input variable(s):
procedure PACS_Chopper_SFT_Warm_OpenLoop { }{
PACS_SPEC_Chopper_SetOpenLoop_BB Building Block 1 Feb 14, 2008 2:14 PM EnDis_chopper Procedure 2 Jan 23, 2008 1:18 PM CONF_chopper Procedure 1 Jan 21, 2008 12:08 PM PACS_SPEC_Chopper_OpenLoop_MoveAbs_BB Building Block 1 Feb 8, 2008 3:04 PM WriteBBID Procedure 1 Jan 14, 2008 10:55 AM PACS_SPEC_Chopper_OpenLoop_MoveRel_BB Building Block 1 Feb 8, 2008 3:04 PM WriteEndBB Procedure 1 Jan 14, 2008 10:55 AM Pacs_DMC_SWON_CHOP_CONT Command 1 Jan 21, 2008 2:51 PM PACS_SPEC_Chopper_OpenLoop_MoveAbs_dHK_BB Building Block 1 Feb 8, 2008 3:04 PM SPEC_Chopper_SynchBlue Procedure 1 Feb 14, 2008 2:14 PM PACS_Chopper_SWON_SWOF_only Procedure 2 Jan 23, 2008 1:18 PM