= OBCP_grat_scan_nochop =

PACS' OBCPs are cast as building blocks, bearing the same number as the corresponding OBCP; this is OBCP 28 (hence BuilBlock = 28).

{{{
// Comments     :
//
// Version      : 1.0
//
// History      : 1.0 05-Apr-2005 Creation by PR
//                1.1 11-apr-2005 DAC. Same correction as
//                                OBCP_spec_2_3_chop, viz. returned time array
//                1.2 27-apr-2005 DAC Corrected OBCP name after MIB
//                1.3 14-jan-2008 DAC Added WriteEndBB at the end of bld. block
//
}}}
Input variable(s):
{{{
int[] block OBCP_grat_scan_nochop PACS 28 {
    int nb_up_dn = 1;            // DMC Seq P#1 : Number of sequences: up down up ...
    int nb_grat_steps_up = 20;   // DMC Seq P#2 Number of grating steps (up-scan)
    int grat_step_up = 133;      // DMC Seq P#3 : Grating step (up-scan)
    int grat_step_dn = -133;     // DMC Seq P#4 : Grating step (down-scan)
    int nb_ramps_grat_pos = 3;   // DMC Seq P#5 : Nb ramps/grat position
    int nb_CS1_CS2 = 1;          // DMC Seq P#6 : Nb of cycles on CS/grat position
    int chop_pos_CS1 = -25000;   // DMC Seq P#7 : Chopper position on CS1
    int chop_pos_CS2 = 25000;    // DMC Seq P#8 : Chopper position on CS2
    int nb_ramps_cs = 3;         // DMC Seq P#9 : Nb ramps plateau on CS
    int nb_grat_steps_dn = 20;   // DMC Seq P#10 Number of grating steps (down-scan)
    int chop_def = 0;            // DMC Seq P#11 : Chopper default position
    int detector = 1;            // Synchronize on this detector 1:Blue 2:Red
    int grat_start_pos = 800000; // Starting grating position
    int grat_start_time = 40000; // Time for grating to move to start position
    int comp_mode_blu = 16;      // "Blue" compression
    int comp_mode_red = 16;      // "Red" compression
    int grat_def = 500000;       // Grating default position
    int grat_def_time = 20000;   // Grating time to move to grat_def [msec]
    int nb_rdouts_ramp = 64;     // Number of readouts per ramp
}{
}}}